Application Instructions - Multi-Trans Select

TRANSFER APPLICATION: PAPER/CARD
150C, 10s, Medium Pressure (2-3 Bar), COLD PEEL

  • Place your transfer paper onto the substrate on which you want to press.
  • Cover everything with a sheet of Matt Finish Economy. (If the surface is uneven, use a thin silicone pad with 1mm thickness).
  • Close the press using the settings above.
  • After the pressing process, place your substrate to one side and allow it to cool down.
  • When the substrate has completely cooled down, carefully remove the transfer paper.
TRANSFER APPLICATION: WOOD/ROUGH SURFACES
130C, 90s, Medium Pressure (2-3 Bar), COLD PEEL

  • Place your transfer paper onto the substrate on which you want to press.
  • Cover everything with a sheet of Matt Finish Economy.
  • Cover with a 1mm silicone pad. This prevents the edges of the transfer paper from transferring to the substrate.
  • Close the press using the settings above.
  • After the pressing process, place your substrate to one side and allow it to cool down.
  • When the substrate has completely cooled down, carefully remove the transfer paper.